© Xi'an NovaStar Tech Co., Ltd. All rights reserved.
| 5G Controllers | |||
| Product Model | MX6000 Pro | MX2000 Pro | CX40 Pro |
| Rack Unit | 6U | 2U | 2U |
| Max. Input /Output Cards | 8 | 2 | / |
| Max. Loading Capacity | 141 Million | 35.38 Million | 9 Million |
| Input Options | MX_4×HDMI 2.0 input card MX_4×DP 1.2 input card MX_4×12G-SDI input card MX_2×HDMI 2.1 input card MX_2×DP 1.4 input card MX_1×DP 1.4+HDMI 2.1 input card MX_1×SMPTE ST 2110(25G) input card MX_2×SMPTE ST 2110(25G) input card | 2×HDMI 2.0 1×DP1.2 2×12G-SDI | |
| 5G Output Options | MX_1×40G QSFP+ output card | 6×5Gbps Neutrik 1×40Gbps QSFP+ | |
| Control Interface | 1G Ethernet | ||
| Control Protocol | TCP/IP, SNMP | ||
| Layers | Up to 32×4K layers | Up to 8×4K layers | Up to 3×4K layers |
| Note: 4×4K layers per output card | |||
| Genlock | Tri-level, Bi-level / Blackburst | ||
| Input Bit Depth | 8bit / 10bit / 12bit | ||
| Image Booster | ✓ | ||
| Dynamic Booster | × | × | ✓ |
| Adaptive Thermal Compensation | ✓ | ||
| Multi-layer Full Grayscale Calibration | ✓ | ||
| Color Management | Color Replacement, 14CH Color Correction, Color Curve, 3D LUT | ||
| No Rectangle Limitation | ✓ | ||
| HDR | HDR10 / HLG | ||
| Brightness Overdrive | ✓ | ||
| Low Latency(<1ms) | ✓ | ||
| Adaptive Frame Rate | 23.98 / 24 / 25 / 29.97 / 30 / 47.95 / 48 / 50 / 59.94 / 60 / 72 / 75 / 100 / 119.88 / 120 / 143.86 / 144 / 240Hz (*Exclusively supported by the custom firmwares of A10s Pro and IC.) | ||
| Multi Mode | ✓ | ||
| 3D | ✓ | ||
| 5G Receiving Card | |
| Model | XA50 Pro |
| Bandwidth | 5G |
| Connector | DDR3 |
| Loading Capacity | 512×1024 |
| Image Booster 2.0 | ✓ |
| Dynamic Booster | ✓ |
| Adaptive Thermal Compensation | ✓ |
| Multi-layer Full Grayscale Calibration | ✓ |
| Adaptive Frame Rate | ✓ |
| HDR (HDR10/HLG) | ✓ |
| Mapping | ✓ |
| Monitoring (Temp. / Volt. / Bit Error) | ✓ |
| RGB Parallel Data Group | 40 |
| Serial Data Groups | 64 / 128 |
© Xi'an NovaStar Tech Co., Ltd. All rights reserved.